| Model | XYZ-4040 | |
| Working Area | 400x400x150mm | |
| Spindle Motor | 1.5KW Water-cooled spindle motor | |
| Working Mode | Stepper motor | |
| Control System | DSP(128MB) or PCIMC control system | |
| Drive Mechanism | German ballscrew for x,y,z axis | |
| Table Surface | T-slot | |
| Frame | Cast Iron | |
| Motion Positioning Accuracy | 0.02/300mm | |
| Repositioning Accuracy | 0.01mm | |
| Max Motion Speed | 8,000mm/min | |
| Max Engraving Speed | 5,000mm/min | |
| Rotating Speed of Spindle | 2,4000rpm | |
| Engraving Tools | 3.175mm,4mm,6mm | |
| Dictate Formate | G code, *.u00, *.mmg, *.plt/HPGL/NC | |
| Operating Voltage | AC220/50Hz | |
| Software | Type3 original with Dongle or Wentai , ArtCAM software/ARTCAM/CAXA/MasterCAM | |
| Packing Size | 910x890x800mm | |
| Net Weight | 85kg | |
| Gross Weight | 134kg | |
